Implementing HP StorageWorks Enterprise Virtual Array Solutions

Send an Enquiry Print Friendly Training Facility

Duration : 5 days

Exam : HP0-J33

Certification supported by this course: ASE HP Storageworks Integration (2011)

Overview

This course provides training for the HP StorageWorks Enterprise Virtual Array family, including the EVA4000/6000/8000, EVA4100/6100/8100, and EVA4400/6400/8400 series. After a conceptual overview, including terminology, the course describes hardware components and functions in detail, including the family of HSV controllers, evolution of disk drive enclosures and Fibre Channel loop switches, the Management Module, which is unique to the EVA4400, and the Windows management server running Command View EVA will also be discussed in detail. Instruction, practical demostrations as well as extensive lab work will be given on how to install, set up, configure, and manage the storage system and hosts using Command View EVA software.
The course describes how events are generated and forwarded for notification as well as basic analysis and troubleshooting procedures for all EVA’s plus in depth instruction and labs on component removal and replacement.

After a basic review of replication solutions, the course provides a description of diagnostic, performance and troubleshooting resources. Several hands-on laboratories are included to correlate with the classroom materials throughout the course

This course does not provide in depth training for the following:

• Advanced Fibre Channel concepts
• SAN technology
• Virtualization concepts
• Storage management appliance
• Web-Based Enterprise Services (WEBES), Remote Support Pack (RSP) or other notification and analysis tools
• Storage systems other than the EVA family
  

Intended Audience

This course is intended for individuals providing basic or advanced EVA management, service & support, installation or configuration services and consulting services on any EVA storage array covered in the course. This includes individuals who have none, limited or  previouse experience of HP EVA storage arrays

Learning Pre-requisites

Although there are no specific pre-requisites for this training, it is recomended that the attendee has a sound working knowledge and preferably experience of other current and previous storage technologies

Objectives

After completing the course, the student should be able to:

• Identify the terminology used with the EVA and virtual storage
• Identify the physical, management and interconnect functions of the HSV controllers, Management Module, disk drive enclosures, FC-AL drives and Fibre Channel loop switch
• Identify features and functions of the HSV controller firmware
• Describe the EVA firmware update procedures
• Describe the EVA disk drive firmware update procedures
• Locate EVA storage system hardware and setup and operate components of the HSV controller and disk drive enclosure
• Use the Management Module and it’s web-based OCP (WOCP) to access storage system management functions
• Connect to the Fibre Channel loop switch and use it’s available interfaces to perform basic functions
• Describe the rack models, power cabling and cabling configurations for all models
• Describe the features and functions of the initial storage and host configuration software called HP SmartStart for EVA storage
• Use HP SmartStart for EVA Storage to initially configure storage and hosts for the EVA4400
• Install & confugure Command View EVA
• Install and identify EVA license functions
• Identifty the features and functions of Command View EVA
• Describe how to configure and monitor storage and hosts
• Identify features and functions of the Storage System Scripting Utility (SSSU) and use the utility to configure storage and hosts
• Describe the event reporting and notification mechanisms used to support the EVA
• Open and view various event log
• Use remote and local event notification options
• Identify features and functions of local and remote replication software
• Describe basic diagnostic sources and how to use those tools to perform basic troubleshooting
• Identify customer self repair (CSR) components and follow the procedures to remove and replace components
• Describe best practices for configuring the EVA with optimisation for availability, performance or cost

110364 04/10

Send an Enquiry Print Friendly Training Facility

To make an enquiry please click the dates below to send us your details.
Venue code: S= Haughton Hall, Shifnal V=Various N=Newark NITLC

Course Code

Title

Venue

Days

Price (ex vat)

May

Jun

Jul

Aug

Sep

Oct

Nov

Dec

Jan

00110364 (ASE)

Implementing HP StorageWorks Enterprise Virtual Array Solutions

S

5

£1,825 €2,008

8th

9th

28th

Please note: all prices quoted exclude VAT, which will be charged at the current UK rate.
Please note that exchange rate fluctuations will be taken into account.